FORMULA 20
Bacterial Petrochemical Degrader
Formula 20 is a broad spectrum of bacterial cultures designed to degrade most industrial wastes. The cultures in Formula 20 are capable of degrading phenols, alcohols, surfactants, detergents, glycols, napthalenes, amines, nitriles, aliphatic and aromatic hydrocarbons, cutting oils, styrene, heterocycles, and low levels of cyanide. Formula 20 will enhance BOD, COD and TSS removal in most all steel mill, chemical, and petrochemical plant wastewater treatment systems.
SPECIFICATIONS
Product: Dormant bacterial cultures and enzymes.
Form: A dry, free-flowing powder.
Color: Beige to light brown.
Specific Gravity: 0.5 - 0.6
Storage: Store product in a dry place between 10º-40ºC. If product becomes wet, it must be used immediately. Do not freeze.
DIRECTIONS
Product may be added directly to aeration tank, lagoon, or oxidation ditch. For trickling filters, it is best to prehydrate product by adding 2 lbs. per 1 gallon of 20º-30º C non-chlorinated water. Allow solution to stand for 30 minutes to 2 hours before adding to trickling filter.
For soil applications, consult your sales representative.
OPERATING CONDITIONS
pH 6.0-8.5
Temp. 10ºC - 45ºC
OPO
4 2 mg/L minimumNH
3N 2 mg/L minimumDo not use in environments where high levels of toxic metals such as zinc, chrome, mercury, are known to exist.
AVAILABILITY
Product is available in 25 lb. plastic pails or 100 lb. fiber drums. Product may be packaged in 1 lb. water-soluble packs for an additional charge.
Private label distributors welcome.
CAUTION
Persons allergic to dust should employ nose and mouth protection when handling this product. In the event of direct contact with the eyes or skin, flush the affected area with water.